The CCI office will be closed from 12:00 pm Wed, Nov 26 through Fri, Nov 28 for Thanksgiving holiday. All orders placed during this time will be processed on Mon, Dec 1.
Home  ›   Products  ›   Vibrators  ›   HR 188 OZ

Vibrators

HR 188 OZ

1-7/8" Oztec Vibrator RubberHead

1-7/8" Oztec Vibrator RubberHead


Show Picture 1Show Picture 2Show Picture 3


1-7/8" Oztec Vibrator RubberHead
$433.36
Originally $462.00, You Save 6%
This item is in-stock and ready to ship!
Quantity:  

Oztec Concrete Vibrators




  • 1-7/8" Oztec Vibrator RubberHead®
  • Patented "High Efficiency" Urethane Dimpled Construction
  • Meets DOT Non-Metal Head Specifications For Protecting Epoxy-Coated Rebar and Expensive Forms
  • Outstanding In Low Slump (to "0" slump) Concrete
  • Essential In Large Pours Of Very Stiff Concrete
  • Makes Concrete Denser With Less Voids To Patch
  • Vibrates @ 12,000 vpm, never drops below 10,500 vpm
  • Provides Superior Action
  • An Absolute Must For Architectural Concrete, Where Cosmetic Surfaces Are Essential
  • All Oztec Vibrators Meet or Exceed ACI Specification #309
  • Head Length - 14"



 Oztec Patented RubberHead

Epoxy Coated Rebar Damage
  Oztec's "High Efficiency RubberHead™" Outperforms

Epoxy coated rebar presents a particularly troublesome problem. Steel heads act like an electric hammer, striking any rebar or forms they contact over 10,000 times per minute, with a force from hundreds to over 2,000 pounds per blow. Contact with a steel vibrator head of as little as one second can chip enough coating to subject the steel to deep rust. Oztec's patented High Efficiency RubberHead vibrator not only meets DOT non-metal head specifications for protecting coated rebar and expensive forms, but exhibit some very special and unique properties. The High Efficiency RubberHead urethane dimpled construction sends strong shock waves off the entire length of the head, with a larger radius of action, producing denser concrete with less voids to patch.

RADIUS OF ACTION
The most important bit of information needed for complete consolidation.
Radius of Action is the distance from the center of the vibrator to the outer edge, where complete consolidation takes place (see diagram). For quality concrete, Oztec lists conservative values for "Radius of Action". Complete consolidation is necessary for low slump concrete with close meshed reinforcement bars, high strength concrete, and architectural concrete. Radius of Action can be twice the listed values when slump is high or super plasterizers are used. It is important these values are used only as a general guide. Specifications are subject to change.
   Oztec Vibrators Radius of Action Diagram
 
 Oztec Vibrators Radius of Action Chart

Oztec RubberHead Sizes


Oztec Vibrators Selection Guide and Tips

Oztec Vibrators Product Catalog




My order was executed quickly and the items were received on time, which, in turn, kept my job on schedule. CCI kept me fully informed as to the status of my order and provided the requisite tracking information. The purchased equipment was top quality. I would not hesitate to do business with CCI again.  - Peter